Hobby & Collectables store with the theme Wires, plugs, switches

Diameter 2.5 mm.

This controller (momentary contact) is for semaphore/target signals, turnouts, uncoupler tracks, and relays and comes with an additional contact that serves as a track current controller for an automatic train control feature.

This controller enables automatic stops and independent startup of trains in a station, etc. The stopping time can be adjusted smoothly. This controller is not suitable for Selectrix operation!

This controller is for operating four turnouts, signals or relays (momentary contact).

Is required if many individual supply lines (eg switches, signals, lighting, etc.) have to be connected to a common pole. 2 electrically isolated terminal strips each with 6 pressure terminals, a total of 12 terminals, allowing connection of at least 24 cables!

With 3 electrically isolated pressure clamps. Especially to use when extending the signal and switch connection, but also as a small distributor plate.

Dual magnetic drive for a maximum of 14 volts AC or DC. To trigger pulse contacts are required. With limit switch.

This controller (continuous contact) is for color light signals and includes an additional contact that serves as a track current controller for an automatic train control feature.

For operating uncoupler tracks, or momentary power feed to isolated sections.

Track rectifier bridges over isolating connections in just one direction (for running though signaled sections in the opposite direction) or protecting the ends of hidden sidings. Not suitable for use with digital layouts.

Can be adjusted through a range of about 10 to 35 ohms (Not over 2 watts continuous operation!) By this mean the power to the locomotive is reduced in pre-determined sections of track, as for example down grades, slow zones and station approaches. Not suitable for digital operation.

∅ 2.5 mm

∅ 2.5 mm